深圳市航宇润滑油有限公司 服务热线:0755-28070986 13825296905
快捷 高效 周到 贴心 全心全意为客户服务 销售电话:0755-28070986 传真:0755-28171229 手机:13825296905 王先生
美孚润滑油 壳牌润滑油 嘉实多润滑油
BP润滑油 福斯润滑油 加德士润滑油
克鲁勃润滑油 道达尔润滑油 埃索润滑油
  • 深圳市航宇润滑油有限公司

    电 话:0755-28070986

    传 真:0755-28171229

    手 机:13825296905

    联系人:王先生

    邮 箱:1310598297@qq.com

    网 址:http://www.hyrhy99.com

    地 址:深圳市宝安区西乡恒丰工业区6栋

联系方式
福斯润滑油系列 > 液压油 > FUCHS PLANTOHYD N

 

FUCHS PLANTOHYD N 详细说明 (浏览654次)
FUCHS PLANTOHYD N


Print

Environmentally Friendly HETG Hydraulic Fluids and Lubricating Oils Based on Vegetable Oils


Environmentally Friendly HETG Hydraulic Fluids and Lubricating Oils Based on Vegetable Oils

It has been recognized for a number of years now that the use of mineral oil-based lubricants poses certain environmental risks. Leakages, emissions and spillages when handling gear and lubricating oils lead to direct pollution of the surroundings and thus the environment. This fact led FUCHS to develop rapidly biodegradable lubricants based on vegetable oils and synthetic esters. 

The PLANTOHYD N series of oils are based on vegetable oils. They represent an environmentally friendly alternative to mineral oil-based hydraulic oils and can be classified as HETG fluids according to ISO/CD 6743-4. 

The advantages of PLANTOHYD N are: 


  • Rapidly biodegradable (greater 90 % within 14 days according to CEC-L-33-A-93) 
  • German Water Hazard Class WGK 0, i.e. generally not hazardous for water 
  • Non-toxic, physiologically harmless 
  • Free of heavy metals 
  • Excellent viscosity-temperature behaviour because of their high natural VI 
  • Excellent anti-wear properties 
  • Extremely shear-stable Rapid air release 
  • Minimal foaming 
  • Insoluble in water 
  • Good demulsibility characteristics 
  • Applicable at tank temperatures ranging from - 27 °C to +70 °C
PLANTOHYD N products are fully compatible with all materials usually found in hydraulic systems. The base fluids used in these products are non-toxic. The fluids are free of heavy metals and chlorinated compounds. 

Application: 

PLANTOHYD N hydraulic oils can be used universally in all hydraulic and general lubricating systems. These pro- ducts should always be used whenever there is a danger of soil or water pollution following a leak or spillage. The greatest potential for such occurrences are in the construction, water, agricultural and forestry industries. The high viscosity index of PLANTOHYD N products give them multigrade characteristics. 

We recommend that the miscibility and compatibility of these products with mineral oil-based hydraulic oils should be checked on a case-by-case basis. As stated in ISO/CD ECO, residual quantities of mineral oil should be kept to a minimum by flushing prior to refilling. Compatible internal finishes on tanks should be selected. Paint finishes which are not 2-part epoxy systems can display poor resistance to mineral oil as well as vegetable oils. In general, we recommend the use of stainless steel tanks. "Free" metals, e.g. tin from soldered joints or zinc from galvanized components should be avoided if possible. Filter systems should also be compatible with vegetable oils. 

The powerful cleaning effect of these fluids can dislodge large amounts of dirt and contaminants and this can, in turn, shorten the life of filters. System filters should be cleaned or changed after about the first week of use with PLANTOHYD N. The ISO/CD ECO guidelines should also be observed. To maintain optimum reliability, any water which has collected in systems which have been shut-down for longer periods should be drained. Water or moisture problems can be reduced if filtering and drying equipment is fitted to tank breathers. According to ISO/CD ECO, water content during use should be kept below 0.1 %. 

Our application engineers will be glad to advise you on: 


  • Experiences with these products 
  • Application possibilities 
  • Material compatibility 
  • Change-over procedures
and service facilities regarding PLANTO products.


Typical data: 

PLANTOHYD   32 N 46 N 68 N  
Hydraulic oil type acc. to ISO/CD 6743-4 and VDMA 24 658   HETG 32 HETG 46 HETG 68  
Characteristics Unit       Test method
Colour   1 1 1 ASTM D 1500
Kinematic viscosity          
at 40 °C mm²/s 31.6 48.6 69.8 ASTM D 445
at 100 °C mm²/s 7.4 10.6 13.9 ASTM D 445
Viscosity index   213 215 207 ASTM D 2270
Density at 15 °C kg/l 0.921 0.924 0.927 ASTM D 1298
Flash point, Cleveland open cup °C >270 >270 >270 ASTM D 92
Pour point °C – 39 – 36 – 36 ASTM D 97
Copper corrosion degree of corr. 1a-100A3 1a-100A3 1a-100A3 ASTM D 130
Rust prevention   pass A pass A pass A ASTM D 665
FZG mechanical gear rig test load stage > 12 > 12 > 12 DIN 51 354-2


 Disclaimer of Liability
深圳市和华利科技有限公司 :-23412919   手机:13670209168

上一产品: 克鲁勃HLP68液压油|KLUBER LAMORA HLP68
下一产品: FUCHS PLANTOHYD S
Copyright (C) 深圳市航宇润滑油有限公司 All Right Reserved 粤ICP备17085974号
电话:0755-28070986 传真:0755-28171229 手机:13825296905 王先生
地址:深圳市宝安区西乡恒丰工业区6栋 邮箱:1310598297@qq.com 网址:http://www.hyrhy99.com 
工业润滑油/脂